Tekvox TEK-MHD44TP 79055, User Manual

Page: 12 / 28

6. System Operation
6.1 Front Panel Button Control
The operation examples are showed in 2.1 Front Panel. Here we make a brief introduction to the
system inquire operations.
Keep pressing the button
“AV” for 3 seconds, it will enter into system inquire menu. Use Left and
Right direction button two check the previous/next item.
Function Items Example Description
Check the
connection status of
inputs Y means the corresponding port is
connected with input device, N means
not.
Check the
connection status of
outputs Y means the corresponding port is
connected with output device, N means
not.
Correspondence
between inputs and
outputs
Shows the correspondence between the 4
inputs and 4 outputs.
Check if the input is
with HDCP Y means the input signal is with HDCP, N
means not.
Check if the output is
with HDCP Y means the output signal is with HDCP,
N means not.
Check the output
resolution Use the UP and DOWN direction button
to check all the 4 output resolutions.
6.2 IR Control
The HDBaseT 4x4 matrix switcher can be controlled by its built-in IR receiver, through the IR EYE
port by connecting with extended IR receiver or controlled remotely by a far-end IR device through
one of its receivers. By using IR & HDBaseT transmission technology the HDBaseT 4x4 matrix
switcher has the following features:

Control far-end output device from local.

Control local input/output device remotely.

Control the HDBaseT 4x4 matrix switcher locally/remotely.
Resolution
Out 1 1920x1080
Out 1 2 3 4
HDCP Y Y Y N
In 1 2 3 4
HDCP Y Y Y N
Out 1 2 3 4
Input 1 2 3 3
Out 1 2 3 4
Connect Y Y N N
In 1 2 3 4
Connect Y Y Y Y