Tekvox TEK 1201- MV-RX, User Manual

Page: 48 / 50

www.tekvox.com
1201-MV
79033-MV User Manual
Command Description
Command Example and
Feedback
zzzz = ASCII data to be sent (Up to 48
characters)
Notes :
1. When reading “ \ x”, the two characters after
“ \ x” will be converted to HEX automatically
2. When typing “ \\ ”, only one “ \ ” will be sent
3. When reading “ \ r” immediately after “ \ x”, “ \ r”
will be converted to “0x0D” in HEX
4. When reading “ \ n” immediately after “ \ x”, “ \ n”
will be converted to “0x0A” in HEX
Baudrate: 9600
Enter sleep to
send:ABCDEFG0A12
/-PD[ x ]: zz zz
Set the HEX “Power Off” command " zz zz " to be
sent to remote display device when the switcher
enters standby mode
x = Baud rate (1 ~ 5)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
zz zz = HEX data to be sent (z = 0~9, A~F and
up to 20 octets)
/-PD[5]:50 6F 77 65 72 4F 66 66
Baudrate: 9600
Enter sleep to send HEX:50 6F
77 65 72 4F 66 66
/+IN[ x ]: zzzz
Set the ASCII “Display Input Select” command
"zzzz" to be sent to remote display device when
powering on the switcher
x = Baud rate (1 ~ 5)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
zzzz = ASCII data to be sent (Up to 48
characters)
Notes :
1. When reading “ \ x”, the two characters after
“ \ x” will be converted to HEX automatically
2. When typing “ \\ ”, only one “ \ ” will be sent
3. When reading “ \ r” immediately after “ \ x”, “ \ r”
will be converted to “0x0D” in HEX
4. When reading “ \ n” immediately after “ \ x”, “ \ n”
will be converted to “0x0A” in HEX
/+IN[5]:Input
Baudrate: 9600
Display input select to
send:Input