www.tekvox.com
1201-MV
79033-MV User Manual
6. IR Remote Control
The switcher provides an
IR EYE
port for IR receiver connection, and can be controlled by the IR
remote shown below.
Note:
There is no long-pressing function on this IR remote.
1.
INPUTS:
Six buttons for input source selection
2.
CONFIG:
Enable or disable auto-switching mode
Cycle the video source displayed in each viewing window
Adjust the window size
Select output resolution
3.
HDMI OUTPUT:
⚫
MIRROR:
Set the local HDMI output as HDBT loop out, meaning
that the HDMI and HDBT ports simultaneously output the same
signal source
⚫
BYPASS HDMI 1:
Set the local HDMI output port to output the
source signal of HDMI input 1
4.
SELECT/FULL SCREEN:
Window A~D buttons for output window
selection and full screen setting
5.
MULTIVIEW:
⚫
Four buttons for built-in multiview mode selection
⚫
Four buttons for user-defined 1~4 multiview mode selection. The
user-defined modes can set in the GUI multiview tab (see
6.
VOLUME:
⚫
MIC (MIX+MIC):
Mute, volume up and down
⚫
Source:
Mute, volume up and down
Note:
All IR remote buttons function in the same way as those in the GUI tab. Please refer to
INPUTS
MULTIVIEW
C
B
D
A
B
A
B
A
C
D
A
B
User 1
User 2
User 3
User 4
1
2
3
4
A
B
C
D
SELECT / FULL SCREEN
CONFIG
MUTE
RES
A / M
VOLUME
Mute
Mute
MIC
Source
5
6
HDMI OUTPUT
MUTE
Bypass
HDMI 1
Mirror
1
2
3
4
5
6
