www.tekvox.com
1201-MV
79033-MV User Manual
4.5 Video Signal Switching
In Multiview modes
Operation: Input # + Window #
Example: Switch Input 1 to Window B:
Press
“
Input 1
”
(The input 1 LED will turn blue, and the A~D LEDs will flash.)
Press
“
Window B
”
(The A, C, and D LEDs will go out, and then the input 1 and Window B LEDs will flash three times. The
input 1 LED will then go out, and the A~D LEDs will turn blue.)
In Full Screen mode
1.
Manual Switching
Operation: Directly press Input #
If the current status is Input 2 set to full screen Window A, press
“
Input 3
”
to switch the HDMI input 3
to Window A. The Input 3 and Window A LEDs will then turn blue.
2.
Auto Switching
Press the
“
AUTO
”
button to enable or disable auto-switching mode. Note that auto-switching mode
only works while in Fullscreen mode. When in auto mode, the switcher will switch according to the
following rules:
⚫
The switcher will switch to the available active inputs with the following priority: Input 1 > Input
2 > Input 3 > Input 4 > Input 5 > Input 6 (USB-C). When the input source and output window are
connected, the corresponding LEDs will turn blue.
⚫
New input: The switcher will automatically select a new input once it has been detected.
⚫
Reboot: If power is restored to the switcher, it will automatically reconnect to the last-selected
input before being powered off.
⚫
In auto mode, the input source also can be switched via the manual switching steps, but doing
so will exit auto-switching mode
⚫
When the full screen mode is switched to multiview mode, auto-switching mode will not exit.
4.6 Switching Status
In Multiview mode
(Window A, B, C, and D LEDs will turn blue).
Operation: Press and hold
Window #
button for at least 3 seconds.
Example: Press and hold
Window B
button for at least 3 seconds (A, C, and D LEDs go out, and then
the corresponding input source LED will turn blue). After 3 seconds, A, B, C, and D LEDs will turn blue.
