Introduction
WVR8RFP
A Remote Front Panel (WVR8RFP) is available as a companion product. When
connected, both front panels are fully operational.
Hardware Installation
This product is to be rack mounted. For installation instructions, refer to the
WVR7200 Waveform Rasterizer Installation and Safety Instructions
.
Product Upgrade
Hardware and software upgrades are available for all products, either as a
fi
eld
upgrade kit or as a free software download from the Tektronix Web site. The
WVR7200 Waveform Rasterizer User Manual
includes instructions for updating
product
fi
rmware.
Operating Information
For basic operating instructions, refer to the
WVR7200 Waveform Rasterizer
User Manual
. For more detailed reference information, refer to the instrument
Online help. (Press the
Help
button on the instrument front panel and then use
the
General
knob, up/down arrow keys, and
SEL
button to navigate through
the topics.)
Power-On Procedure
1.
Connect the supplied power cord to the rear-panel power connector.
2.
Press the power button on the instrument front-panel and the instrument will
turn on.
3.
Wait for the system to complete its power-on self-tests.
NOTE.
The Standby button on the front-panel does not disconnect mains power.
Only the power cord at the rear of the product can disconnect mains power.
Power-Down Procedure
1.
Press the power button on the instrument front-panel to turn the instrument off.
2.
To remove power completely, disconnect the power cord from the rear-panel
of the instrument.
2
WVR7200 Waveform Rasterizer Service Manual
