Incoming Inspection
Digital Audio Input
(Options DG, DS, AD,
& DDE)
1.
Press the FACTORY button to restore the factory preset.
2.
Set the digital audio generator to output a 1 kHz, –6 dBFS sine wave.
3.
Press and hold the
DISPLAY SELECT 4
button to display the AUDIO
pop-up menu.
4.
Select
Audio Input > AES A
.
5.
Press the
AUDIO
button to close the menu.
6.
Connect the unbalanced output of the digital audio generator to the AES A
1-2 input.
7.
Verify that the
fi
rst set of level meter bars indicates –6 dBFS.
8.
Repeat steps 6 and 7 for AES A 3-4, AES A 5-6, and AES A 7-8.
9.
Record Pass or Fail for AES A in the test record.
10.
Press and hold the
DISPLAY SELECT 4
button to display the AUDIO
pop-up menu.
11.
Select
Audio Input > AES B
.
12.
Connect the output of the digital audio generator to the AES B 1-2 input.
13.
Press the
AUDIO
button.
14.
Verify that the
fi
rst set of level meter bars indicates –6 dBFS.
15.
Repeat steps 12 and 14 for AES B 3-4, AES B 5-6, and AES B 7-8.
16.
Record Pass or Fail for AES B in the test record.
17.
Set the SDI generator for a 525/270 color bars signal from a DVG1.
Waveform Rasterizers Speci
fi
cations and Performance Veri
fi
cation
63
Summary of Contents for WVR6020
Page 2: ......
Page 6: ......
Page 14: ...Preface viii Waveform Rasterizers Specifications and Performance Verification...
