Tektronix WVR6020, Technical Reference

Page: 23 / 138

Speci fi cations
Table 14: Program error alarms
Characteristic Performance requirement Reference information
Alarm Coverage Alarms only reported on selected input.
(See Table 45 on page 30.)
Alarm Log Depth 10,000 alarm entries. Volatile
Alarm Log Time stamping
Time of Day, and Selectable LTC, VITC,
or ATC (Ancillary Time Code).
Alarm Noti fi cation All alarms may be con fi gured to be
reported to any or all of the following:
XGA display Icon or Text, Beeper, SNMP,
Ground Closure Alarm Output, Web
based User Interface, Alarm Log.
Table 15: Ethernet
Characteristic Performance requirement Reference information
SNMP For instrument control & feedback of
status. Complies with SNMP version 2.
IP Address Mode Supports manual and DHCP.
Connector RJ-45 LAN connector supporting 10/100
BaseT. The 10/100Base-T Ethernet port
connector arrangements:The RJ-45
connector has built in LEDs. The Green
LED indicates an active connection. The
Yellow LED indicates speed. ON = 100,
OFF = 10.
Table 16: XGA picture monitor output characteristics
Characteristic Performance requirement Reference information
Amplitude, typical Can switch between 1 V and 0.7 V.
Resolution 1024 x 768 with 16 colors.
Table 17: Ground closure remote / LTC time code input characteristics
Characteristic Performance requirement Reference information
LTC Input Connector
Balanced, unterminated
through rear panel GC remote
connector.
LTC Input Impedance Greater than 10 k Ω .
LTC Signal Characteristics Linear Time Code per IEC
Publication 461.
LTC Signal Amplitude Range,
typical 0.2 V
p-p
to 5.0 V
p-p
balanced
differential or single-ended.
Waveform Rasterizers Speci fi cations and Performance Veri fi cation 9