Operating Basics
12
TSG 95 Pathfinder
User Manual
indicated on the second line of the TSG 95 display, as shown in
the next illustration.
Editing ID Messages
In the TSG 95, only the current ID message may be edited. The “cur-
rent” message is the ID that will appear in the output if ID=on. (The
current ID will not appear in the output when ID=off, and may not
appear in the output if ID=cyc, but it can still be edited and saved in
either case.)
1. Press
ID Edit
. The current ID message will appear on the LCD.
2. Use the arrow keys to position the blinking underline cursor and
enter text with the alphanumeric keys.
3. Press
Enter
or one of the rectangular keys to terminate the ID edit;
the new ID will become the current ID. If ID=on, the new ID will
be inserted into the video output. Note that if a stored ID or pre-
set is recalled before new current ID is saved (see “Saving ID
Messages,” page 13), the changes will be overwritten and lost.
Positioning ID Messages
The current ID can be positioned within the safe area of active video,
or the first line can be placed in the vertical interval.
1. Press
Shift
, then
ID Edit
. The LCD will look something like this:
2. Change the horizontal (H) position with the
A
/
"
keys and the
vertical (V) position with the
Y
/
B
keys.
The H position can range from ØØ (left edge of safe area) to
69–3n, where n is the number (1–16) of the right-most character
position occupied by the message. Note that, when editing a short
message (n < 16) that has been placed as far to the right as pos-
Operating Basics
12
TSG 95 Pathfinder
User Manual
indicated on the second line of the TSG 95 display, as shown in
the next illustration.
Editing ID Messages
In the TSG 95, only the current ID message may be edited. The “cur-
rent” message is the ID that will appear in the output if ID=on. (The
current ID will not appear in the output when ID=off, and may not
appear in the output if ID=cyc, but it can still be edited and saved in
either case.)
1. Press
ID Edit
. The current ID message will appear on the LCD.
2. Use the arrow keys to position the blinking underline cursor and
enter text with the alphanumeric keys.
3. Press
Enter
or one of the rectangular keys to terminate the ID edit;
the new ID will become the current ID. If ID=on, the new ID will
be inserted into the video output. Note that if a stored ID or pre-
set is recalled before new current ID is saved (see “Saving ID
Messages,” page 13), the changes will be overwritten and lost.
Positioning ID Messages
The current ID can be positioned within the safe area of active video,
or the first line can be placed in the vertical interval.
1. Press
Shift
, then
ID Edit
. The LCD will look something like this:
2. Change the horizontal (H) position with the
A
/
"
keys and the
vertical (V) position with the
Y
/
B
keys.
The H position can range from ØØ (left edge of safe area) to
69–3n, where n is the number (1–16) of the right-most character
position occupied by the message. Note that, when editing a short
message (n < 16) that has been placed as far to the right as pos-