TSG 95 Pathfinder
User Manual
27
Appendix A: Characteristics
The information in this section is included for the convenience of the
TSG 95 operator. It is not intended as a complete list of guaranteed
specifications. The waveform illustrations represent properly de-
coded output. For a full list of instrument specifications, as well as
performance verification and adjustment procedures, please see the
TSG 95 Service Manual (Tektronix p/n 070-8917-0
X
).
NOTE
. Shielded cables were used in the EMI certification of this
instrument; therefore, it is recommended that shielded cables be used
when operating. (EC 92)
Safety Standard Compliance
The following safety standards apply to the TSG 95:
H
ANSI S82 — Safety Standard for Electrical and Electronic Test,
Measuring, Controlling, and Related Equipment, 1988.
H
CAN/CSA C22.2 No. 231 M89 — CSA Safety Requirements for
Electrical and Electronic Measuring and Test Equipment.
H
IEC1010-1 — Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use (1990).
H
UL1244 — Standard for Electrical and Electronic Measuring and
Testing Equipment, Second Edition (1980).
EMI Compliance
The following electromagnetic interference (EMI) standard applies
to the TSG 95:
H
47 CFR, Chapter 1 (FCC Rules), Part 15, Class A.
Refer to the compliance statement at the front of this manual for
other standards.
TSG 95 Pathfinder
User Manual
27
Appendix A: Characteristics
The information in this section is included for the convenience of the
TSG 95 operator. It is not intended as a complete list of guaranteed
specifications. The waveform illustrations represent properly de-
coded output. For a full list of instrument specifications, as well as
performance verification and adjustment procedures, please see the
TSG 95 Service Manual (Tektronix p/n 070-8917-0
X
).
NOTE
. Shielded cables were used in the EMI certification of this
instrument; therefore, it is recommended that shielded cables be used
when operating. (EC 92)
Safety Standard Compliance
The following safety standards apply to the TSG 95:
H
ANSI S82 — Safety Standard for Electrical and Electronic Test,
Measuring, Controlling, and Related Equipment, 1988.
H
CAN/CSA C22.2 No. 231 M89 — CSA Safety Requirements for
Electrical and Electronic Measuring and Test Equipment.
H
IEC1010-1 — Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use (1990).
H
UL1244 — Standard for Electrical and Electronic Measuring and
Testing Equipment, Second Edition (1980).
EMI Compliance
The following electromagnetic interference (EMI) standard applies
to the TSG 95:
H
47 CFR, Chapter 1 (FCC Rules), Part 15, Class A.
Refer to the compliance statement at the front of this manual for
other standards.
