Operating Basics
14
TSG 95 Pathfinder
User Manual
Recalling ID Messages
1. Press the
Recall
key.
2. Use the
A
and
"
keys to select one of the ID message numbers,
ID# 1 through ID# 8. The first line of the message will appear on
the second display line; press the
B
key to see the second line of
the message. For example, if the saved ID# 1 is “TEKTRONIX
TSG95 PAL/NTSC,” the display will first look like this:
Pressing the
B
key will change it to this:
Note that an empty character position will show as a black space
in the video, while the symbol indicates a “Blank.” Underlying
video will show through a Blank.
3. Press
Enter
to recall the ID message.
4. Press any rectangular key to exit the Recall menu and resume
normal operation.
Setting up an ID Cycle
An ID cycle is a sequence of up to four stored ID messages. Once
you set up a cycle, it will be inserted in the video output if: ID is
toggled On with the
ID On/Off
key, and the ID CYCLE item of the ID
menu is set to “on.” When those two conditions are met, the TSG 95
display will indicate ID=cyc during normal operation.
1. Edit and save the ID messages that you want to cycle (see
“Editing ID messages,” page 12). Note the numbers of the IDs,
and the order in which they should appear.
2. Enter the ID menu by pressing
Shift
, then
ID On/Off
.
3. Press
B
twice to reach the CYCLE SETUP item, then press
Enter
.
The display will resemble the following illustration.
Operating Basics
14
TSG 95 Pathfinder
User Manual
Recalling ID Messages
1. Press the
Recall
key.
2. Use the
A
and
"
keys to select one of the ID message numbers,
ID# 1 through ID# 8. The first line of the message will appear on
the second display line; press the
B
key to see the second line of
the message. For example, if the saved ID# 1 is “TEKTRONIX
TSG95 PAL/NTSC,” the display will first look like this:
Pressing the
B
key will change it to this:
Note that an empty character position will show as a black space
in the video, while the symbol indicates a “Blank.” Underlying
video will show through a Blank.
3. Press
Enter
to recall the ID message.
4. Press any rectangular key to exit the Recall menu and resume
normal operation.
Setting up an ID Cycle
An ID cycle is a sequence of up to four stored ID messages. Once
you set up a cycle, it will be inserted in the video output if: ID is
toggled On with the
ID On/Off
key, and the ID CYCLE item of the ID
menu is set to “on.” When those two conditions are met, the TSG 95
display will indicate ID=cyc during normal operation.
1. Edit and save the ID messages that you want to cycle (see
“Editing ID messages,” page 12). Note the numbers of the IDs,
and the order in which they should appear.
2. Enter the ID menu by pressing
Shift
, then
ID On/Off
.
3. Press
B
twice to reach the CYCLE SETUP item, then press
Enter
.
The display will resemble the following illustration.