Performance Verification
4- 8
TPS2000 Series Digital Storage Oscilloscopes Service Manual
5.
Set the leveled sine wave generator frequency to
10 MHz
.
6.
Set the leveled sine wave generator output level to approximately
500 mV
p-p
so that the measured amplitude is approximately
500 mV
. (The measured
amplitude can fluctuate around 500 mV.)
7.
Press
SET LEVEL TO 50%
. Adjust
TRIGGER LEVEL
as necessary and
then check that triggering is stable.
8.
Set the leveled sine wave generator frequency to the following:
H
100 MHz
if you are checking a TPS2012/2014
H
200 MHz
if you are checking TPS2024.
9.
Set the oscilloscope SEC/DIV to
10 ns/div
.
10.
Set the leveled sine wave generator output level to approximately
750 mV
p-p
so that the measured amplitude is approximately
750 mV
. (The measured
amplitude can fluctuate around 750 mV.)
11.
Press
SET LEVEL TO 50%
. Adjust
TRIGGER LEVEL
as necessary and
then check that triggering is stable.
12.
Change the oscilloscope setup using the following step:
Press menu button
Select menu option
Select setting
TRIGGER
Slope
Falling
13.
Press
SET LEVEL TO 50%
. Adjust
TRIGGER LEVEL
as necessary and
then check that triggering is stable.
14.
Disconnect the test setup.
15.
Repeat steps 1 through 14 until all input channels have been checked.
This test checks the edge trigger sensitivity for the external trigger.
1.
Set up the oscilloscope using the following steps:
Press menu button
Select menu option
Select setting
DEFAULT SETUP
—
—
CH 1 (or whatever channel is
currently being tested).
Voltage Probe
1X
TRIGGER
Source
Ext
Mode
Normal
Check External Edge
Trigger Sensitivity
Summary of Contents for TPS2000 Series
