Tektronix TLA715 Series, Service Manual

Page: 96 / 147

Removal and Installation Procedures
TLA715 Dual Monitor Portable Mainframe Service Manual
6- 33
Bend
tabs
Hold-down bracket
Fan
Cable tie
Latch
Figure 6- 17: Individual fan removal
Use the following procedure to reinstall the individual fans from the rear chassis
fan tray:
1.
Reinsert the fan wires into the cable connector. Be sure to insert the
(color--coded) wires into the same locations as they were removed from in
step 5. The “finger” of metal that secures the wire end into the connector
should be pointed up and outward for it to lock into place. (See insert,
Figure 6--17.)
2.
Position the fan onto the rear chassis fan tray.
3.
Gather the fan cables together, tie them together with a cable tie, and
position them so that they do not interfere with any fan blades.
Installation