Tektronix TLA600 Series, Service Manual

Page: 69 / 188

Performance Verification: Logic Analyzer
4- 18
TLA600 Series Logic Analyzer Service Manual
This procedure verifies the setup time of the logic analyzer.
SW test name FPV_Setup_0F
Equipment re-
quired Adjustment/verification fixture and fixture supply (item 2)
Prerequisites Warm-up time: 30 minutes
Test equipment connected as shown in Figure 4--6
Diagnostics and SELF_CAL pass
Adjustment/verification
fixture
J2
J1
J26
Fixture supply
J4
Clock channel
C2/C3/CK3
Channel/Group
J5
Figure 4- 6: Initial FPV_Setup_0F test setup
1.
If the logic analyzer application is running, quit the application and verify
that all of the prerequisites listed previously are met for the procedure.
2. Follow the on-screen instructions to run each portion of the test for each
parameter of the instrument.
3. Verify that all of the tests pass. If a test fails, run the Deskew routine as
described on page 5--6, then rerun the test.
Procedure 3:
FPV_Setup_0F