Tektronix TLA 711, Installation Manual, Page: 24 / 82

Basic Installation
8
TLA 700 Series Installation Manual
Table 2: Additional accessory connection information
Item Description
Monitor If you use a non-standard monitor, you may need to change the
the Windows 95 display settings to achieve the proper
resolution for your monitor. Refer to Set the Display Driver on
page 58 or to Adjust the Display Desktop Settings for an
External Monitor on page 62. You may also want to refer to the
documentation for your display monitor for installation
information.
Printer Connect the printer to the EPP (enhanced parallel port)
connector directly. If your printer has a DB–25 connector, use
the adapter cable that came with your logic analyzer to connect
to the EPP connector.
Rackmount Refer to the TLA 711 Benchtop Mainframe Rackmount
Installation Instructions for information on installing the
rackmount kit.
Other Refer to the TLA 700 Series Application online release notes
for additional accessory installation information not covered in
this manual. You should also refer to the user or installation
documentation that came with your accessory.