Tektronix SDA601, Service Manual

Page: 85 / 132

Maintenance
SDA 601 Serial Digital Analyzer 5- 5
(f) RS232 loop back
Press Enter
(g) Disp RS232 outs
Off <> On
(h) Disp SLM Numeri
Off <> On
(i) Previous Menu
Press Enter
(4) NVRAM/TIC Dgs..
Press Enter
(a) Get TIC Serial
Press Enter
(b) Get TIC Time
Press Enter
(c) Read TIC Memory
<> 0
(d) Factory Reset
1
Press Enter
(e) Previous Menu
Press Enter
(5) Flash Diags..
Press Enter
(a) Checksum Memory
Press Enter
(b) Read Byte 10000
Press Enter
(c) Writ Byte 10000
MIN = 0 <> MAX = 255
(d) Erase Sec 10000
Press Enter
(e) Read SLM Cals
Press Enter
(f) Write Byte Loop
MIN = 0 <> MAX = 255
(g) Previous Menu
Press Enter
(6) Calibration..
Press Enter
(a) Calibrate SLM
Press Enter
(b) Adj Serial Pot
MIN = 0 <> MAX = 511
2
(c) Show Curr Temp
Press Enter
(d) Set Manuf Watch
Press Enter
(e) Previous Menu
Press Enter
(7) FW Upgrade ..
Press Enter
1
This will reset the instrument to factory defaults; all current user settings will be overwritten.
2
This value is adjusted during manufacture. To be changed only by qualified service personnel; see page 4--4.