Tektronix SDA601, Service Manual

Page: 45 / 132

Operating Information
SDA 601 Serial Digital Analyzer 2- 23
NOTE
. To remove the cross hairs from AUX output—regardless of how you exit
Cursor Data display mode—you must also set the Video Cursor item in the
I/O
menu to “No Display.”
Figure 2- 17: The SDA601 Time Display
Time Display Mode. Press the
Time (F)
key to devote the SDA601 display to the
current date and time. If you wish to alternate the time display with previously-
selected SLM or Cursor data, toggle the “Disp Cur Time” item On through the
Display Select menu. The LCD will resemble Figure 2--17.
Review Display Mode. Press the
Review (G)
key to cancel the other display modes
(SLM, Cursor, and Time) and review the results of the ongoing Watch ses-
sion—or the most recent Analysis—on the LCD. Once you have pressed
Review
(G)
, the SDA601 display will resemble one of the two shown in Figure 2--18; use
the B key to review the status of individual Analyze or Watch items.
OR
Figure 2- 18: The First Review Display
Recall that the AUX output signal is “pseudo-video” that is decoded from the
digital input signal. It may be viewed on an analog video monitor. The AUX
output has three optional modes: the OSD (on-screen display), Pulse Cross, and
AUX Output Modes