Tektronix SDA601, Service Manual

Page: 32 / 132

Operating Information
2- 10 SDA 601 Serial Digital Analyzer
H
Similar reversed “S” and “SL” icons (not shown) will appear when SDA601
keypad is shifted and shift locked.
H
The down-arrow in the lower right indicates that the
B
key may be used to
reveal another (higher-numbered) page. An up-arrow will appear in all other
pages to indicate that the
Y key may be used.
The Analyze OSD is similar; see Figure 2--10, on page 2--14.
Preliminary Settings
Once the SDA601 is up and running, you should choose some settings
depending on how you’ll be using the instrument. These settings are made
through the Utility menu. Follow these directions to set the current date and
time, set the Battery Type, and enable Auto Power Down (if desired).
1. To enter the SDA601 Utility menu, hold the Lock Out key down and press
the
ON
button. Release the
ON
button, but continue to press the
Lock Out
key
until the display resembles Figure 2--7.
Figure 2- 7: The Initial SDA601 Utility Menu Display
2. Once in the Utility menu, use the Y and B keys to scroll to the Set Time
item, and press
Enter
. The instrument display will change to resemble
Figure 2--8.
Figure 2- 8: The Set Time Display
3. The underline cursor indicates the active character position. Move the cursor
with the
A and " keys. Enter the appropriate character from the SDA601
keypad. When the cursor is in positions that require numeric entry, the keys
will be automatically shifted. When you enter an appropriate character for
the field, the cursor will move one position to the right. The acceptable
Set the Date and Time