Removal and Installation Procedures
RTX130B QAM & VSB RF Signal Generator Service Manual
4-25
e.
Use a screwdriver with a T-10 Torx tip to remove the ten screws securing
the A20 PCI Backplane board to the chassis.
f.
Lift the board up and away from the chassis.
4.
Reinstallation
: Perform step 3 in reverse order to reinstall the A20 PCI
Backplane board.
1.
Assemble equipment and locate modules to be removed:
a.
You need a screwdriver with a
1
/
4
inch nut driver.
b.
Locate the connector in the locator diagram Board
modules,
Figure 4-3,
page 4-12.
2.
Orient the instrument:
Set the RTX130B so its bottom is down on the work
surface and its rear is facing you.
3.
Remove the Printer connector:
See Figure 4-10 on page 4-22.
a.
Remove the parallel dongle.
b.
Remove the A180 QAM Modulator board as described on page 4-23.
c.
Remove the A12 Main board as described on page 4-23.
d.
Disconnect the cable from CN3 on the CPU board.
e.
Use a
1
/
4
inch nut driver to unscrew the two hex-headed mounting posts
securing the connector to the chassis.
f.
Pull the connector away from the chassis.
4.
Reinstallation:
Torque the dongle screws to 5 inch lbs. Perform step 3 in
reverse order to reinstall the Printer connector.
Printer Connector
Summary of Contents for RTX130B
