Tektronix RTX130B, Service Manual

Page: 54 / 180

Performance Verification
3-4
RTX130B QAM & VSB RF Signal Generator Service Manual
Figure 3-5: Internet Protocol (TCP/IP) Properties dialog box
The settings in the dialog box depend on whether a DHCP (Dynamic Host
Configuration Protocol) server is in the network connected to the RTX130B.
When the DHCP Server Is in the Network. If the DHCP server is in the network,
perform steps 9 and 10, otherwise skip to step 11.
9.
In the dialog box, select
Obtain an IP address automatically
and
Obtain
DNS server address automatically .
10. Click the OK button.
The RTX130B accesses the DHCP server and obtains the addresses automatical-
ly when connected to the network.
Refer to the user documentation supplied with your server OS for detailed
information about DHCP server functions.
NOTE
. Under some network environments, the RTX130B may not be able to
obtain the IP address automatically from a DHCP server. In this case, you need
to enter the appropriate address value in each submenu item.