Tektronix RTX130B, Service Manual

Page: 91 / 180

Performance Verification
RTX130B QAM & VSB RF Signal Generator Service Manual
3-41
3. Configure the DUT RTX130B system with the following settings for GbE
testing:
a. Double-click the RTX130B MPEG player icon on the desktop to start
the player.
MPEGPlayer.lnk
b. From the File menu, select Open > Look in (dropdown menu) > Local
Disk (D) > test streams > test40.TRP > Open.
c. Make the following selections in the Play menu:
H
Play Interface > IP . . . . . . . .
H
Play Packet Size >188 . . . . . . . .
H
Play Clock dialog box . . . . . . . .
H
Make sure the Internal button is selected
H
Make sure the “Data Rate” section shows:
40
27
X 27.0 = 40.000000
H
Play > Update > On (checked)
H
Play > PCR Initial Value... dialog box:
H
Base Value (33): 0
H
Extension Value (9): 0
H
Click the OK button
H
Play > Source > Disk (checked)
H
Play > Loop > On (checked)
H
Start > Stop... dialog box:
H
Start radio button selected
H
0% text-entry-box set to 0
H
100% text-entry-box set to 386555
H
Format set to Packets
H
Play > Auto Play > Off (checked)
H
Play > Timer Play... (ignore this; it should show the current date and
time)