Tektronix RTX130B, Service Manual

Page: 108 / 180

Maintenance
4-4
RTX130B QAM & VSB RF Signal Generator Service Manual
Table 4-1: External inspection check list
Item Inspect for Repair action
Cabinet, front panel,
and cover.
Cracks, scratches, deformations,
damaged hardware or gaskets.
Repair or replace defective
module.
Front-panel buttons Missing, damaged, or loose
buttons.
Repair or replace missing or
defective buttons.
Connectors Broken shells, cracked insulation,
and deformed contacts. Dirt in
connectors.
Repair or replace defective
modules. Clear or wash out dirt.
Accessories Missing items or parts of items,
bent pins, broken or frayed
cables, and damaged connec-
tors.
Repair or replace damaged or
missing items, frayed cables, and
defective modules.
Cleaning Procedure — Exterior. To clean the RTX130B exterior, perform the
following steps:
1.
Remove loose dust on the outside of the RTX130B with a lint-free cloth.
2. Remove remaining dirt with a lint-free cloth dampened in a general purpose
detergent-and-water solution. Do not use abrasive cleaners.
3. Clean the light filter protecting the monitor screen with a lint-free cloth
dampened with a gentle, general purpose detergent-and-water solution.
CAUTION
. To prevent getting moisture inside the RTX130B during external
cleaning, use only enough liquid to dampen the cloth or applicator.