Installation Instructions
16
RM4000 Rackmount Kit
2.
Mount the slide-out track assemblies, using the slide drawer hardware listed
in the kit parts list, Figure 1-10:
a.
Select the mounting position in rack:
Select two 0.5 inch-spaced holes in
the front rail. Verify that the 4.36 inch and 10.500 inch clearances exist
relative to those mounting holes. See Figure 11 on page 17.
Outer track
Inner track
Rear bracket
Bar nut
Right slide-out track assembly
Front flange (mounts to
front rail of rack)
Rear flange (mounts to
rear rail of rack)
Round cut out
Left slide-out track assembly
Flange-to-Flange: 514.4 mm (20.25 in) minimum
to 673.1 mm (26.50 in) maximum
Figure 10: Assembly of slide-out track assemblies
