Installation Instructions
12
RM4000 Rackmount Kit
in the back support plate with the slots in the mounting plates. Tighten
screws to 8 in-lb. See Figure 6.
NOTE
. The back support plate and top support plate have holes to facilitate
mounting optional accessories. For example, Figure 6 shows the TEK-USB-488
GPIB to USB Adapter mounted to the back support with screws. (You can also
use nylon straps to mount accessories.)
4.
Install the top support plate on the left and right mounting plates using four
6-32 x 0.250 inch flathead T-10 TORX-drive screws tightened to 8 in-lb. See
Figure 6.
Flathead
screws (4)
Back support
plate
Screws (4)
Handle (2)
Optional
accessory
LIne up
Screws (4)
Top support plate
Figure 6: Installing the handles, top, and back support
