Installation Instructions
10
RM4000 Rackmount Kit
Remove
Equipment Required:
Screwdriver handle with T-15 tip.
This procedure prepares the instrument for installation of the rackmount parts.
NOTE
. Retain all parts removed from the instrument for later use. Some of those
parts will be reinstalled as you perform this rack conversion; store the remain-
der in case reconversion to a standard instrument configuration is desired at a
later time.
1.
Disconnect the power cord from the rear of the instrument.
2.
Remove the four T-15 TORX screws that secure the rear cover to the front
case assembly. See Figure 4.
3.
Remove the rear cover.
Remove 4
screws
Rear case cover
Front case
assembly
Figure 4: Removal of rear case cover
