Operating Basics
5.
To move an icon, tap the
Select
button
and then touch and drag the icon to a
new position. If the measurement was
part of a stack of measurements (such as
measurements created by a macro), then
iMap moves the topmost icon in the stack.
If the icon is moved to a new stack of
measurements, then the icon is placed in
the stack in time-of-measurement order.
NOTE.
To add measurements at a new location on a grid map with an active GPS receiver, you must physically move to the
new location.
NOTE.
You can move measurement icons on an image map, or on a grid map with the GPS receiver inactive. Attempting
to move an icon on a grid map with an active GPS receiver causes iMap to drag the map and its measurement icons to a new
position on the screen; the measurement icons are not moved.
When a GPS receiver is not active, you can move any measurement icon. This includes moving measurement icons that were
placed on the map while in GPS mode. iMap does not reposition moved GPS-related measurement icons back to their original
geophysical position on a map when the GPS receiver is active.
58
RF Scout Quick Start User Manual