Chapter 4
Using VdrPanel
176
Profile PRO Series
14. The
Clip Position Bar
displays the relative position of the current frame
within the current clip. For example, if the
Clip Position Bar
is to the far left,
the frame is at the beginning of the clip; if it is at the far right, the frame is at
the end. Click on the bar to activate it or press
j
or
↓
.
15. The
Remove In Mark
button removes the in mark and restores the clip to its
first available field.
16. The
Set In Mark
button sets the in mark for the current clip at the current
timecode (you can also press
i
). When the clip is played, it starts at the in
mark instead of the clip beginning; however, the portion before the in mark
is not lost. Use
Remove In Mark
to remove the in mark. The in mark only
affects this instance of the clip. If the clip repeats in the clip list or is used by
another panel, this in mark is not automatically present.
17. The
Trim to In Mark
button removes the portion of the current clip preceding
the in mark (you can also press
c
). This action affects all copies of this clip
on all panels. The trimmed material is not retrievable. A warning message
and verification prompt are displayed before the material is trimmed.
18. The
Trim from Out Mark
button removes the portion of the current clip
following the out mark (you can also press
u
). This action affects all copies
of this clip on all panels. The trimmed material is not retrievable. A warning
message and verification prompt are displayed before the material is
trimmed.
19. The
Set Out Mark
button sets an out mark for the current clip at the current
timecode (you can also press
o
[not zero]). When the clip is played, it ends
at the out mark; however, the portion after the out mark is not lost. Use
Remove Out Mark
to remove out mark. An out mark only affects this
instance of the clip. If the clip repeats in the clip list or is used by another
panel, the out mark is not automatically present.
20. The
Remove Out Mark
button removes the out mark and restores the clip to
its last available field.
21. The
Group Name
box lists the name of the current clip list.
Summary of Contents for Profile Pro II
