![background image](http://html1.mh-extra.com/html/tektronix/profile-pro-ii/profile-pro-ii_user-manual_1077582167.webp)
Selecting Video Crosspoints
Profile PRO Series
167
To set a panel to Louth switcher mode:
1. Click the panel to activate it. The panel controller must be Louth
Automation. For information on how to set the controller to Louth
Automation, see “Selecting a Controller” on page 153.
2. Choose
Options | Louth Switcher Mode
. A check mark appears next to
Louth Switcher Mode in the Options menu to show that it is activated.
3. To return the panel to normal mode, choose
Options | Louth Switcher
Mode
again.
To set a panel to Louth end mode:
1. Click the panel to activate it. The panel controller must be Louth
Automation. For information on how to set the controller to Louth
Automation, see “Selecting a Controller” on page 153.
2. Choose
Options | Louth End Mode
. A check mark appears next to Louth
End Mode in the Options menu to show that it is activated.
3. To return the panel to normal mode, choose
Options | Louth End Mode
again.
Selecting Video Crosspoints
A video crosspoint shows the connection between a video input and output,
with a JPEG codec, MPEG encoder, or MPEG decoder between.
• Video inputs (top-left corner) represent video input connectors on the back
panel. For example, video inputs can be connected to JPEG codecs or MPEG
encoders for recording onto disk, or connected to video output for display.
• Video outputs (top-right corner) represent video output connectors on the
back panel. For example, video outputs can be connected to JPEG codecs or
MPEG decoders for playback of recorded material from disk or to video
inputs.
To specify video crosspoints:
1. In VdrPanel, choose
Window | Video Crosspoint
to open the dialog box.
The green boxes indicate current connections. For example, a green box at
the intersection of a SDI-InA-J14 serial digital video board in slot J14 and
a Panel A: MPEG Rec #1 encoder connects the video signal from the back
panel input labeled Video I/O Serial Digital Component IN A to an MPEG
encoder.
Summary of Contents for Profile Pro II
