Tektronix Phaser 220 Reference Manual Download

Page: 154 / 178

Using Different Printer Language Modes

9-6

Phaser 220 Drivers and Utilities

Testing printer language mode change

HP-GL mode

HPGLTEST.PLT

is an HP-GL Þle that prints a single line of text if the printer

is operating in HP-GL mode.

Send this Þle to the printer (with the DOS

COPY

command) after you send

HPGL.PS

to make sure that the change was made correctly.

PostScript mode

PSTEST.PS

is a PostScript Þle that prints a single line of text if the printer is

operating in PostScript mode.

Send this Þle to the printer (with the DOS

COPY

command) after you send

PSCRIPT.PS

to make sure that the change was made correctly.

Setting default HP-GL pen colors

The

HPGLPENS.PS

Þle changes the color and width of the default pen

colors. The HP 7475A plotter actually has only six pens, but the printer's
emulation supports up to 256 pens.

Note

HP-GL pen settings cannot be made persistent across power
cycles; pen settings revert to the default when the printer is
turned off.

HPGLPENS.PS

, pen number, pen width, red value, green value, and blue

value are listed in parentheses after

/ColorSetup

as shown below.

/ColorSetup (

pen_number width red_value green_value

blue_value...

)

Summary of Contents for Phaser 220



















































































































































































Search results

Summary of Contents for Phaser 220

Reviews:

Related manuals for Phaser 220

Brands by name

Popular brands

Tektronix Phaser 220, Reference Manual

Search results

Summary of Contents for Phaser 220

Reviews:

Related manuals for Phaser 220

Brands by name

Popular brands