Using Fonts and SCSI Hard Disks
7
Printing Reference
7-7
Downloading Macintosh fonts
1.
The
LaserWriter Utility
is compressed into the
Phaser 220
Utilities.sea
archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2.
Select the appropriate printer in the
Chooser
.
3.
Locate the
LaserWriter Utility
Þle in the folder on your hard disk
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
4.
Double-click on the
LaserWriter Utility
icon.
5.
To send fonts to the printer, use the
Download Fonts
command in
the
File
menu.
(To send PostScript Þles to the printer, refer to the topic ÒUsing the
LaserWriter Utility to send Þles to the printerÓ in Chapter 1,
ÒBefore You Begin.Ó)
6.
Select the font then click
Open
. The font is sent to the printer. The
font remains available until the printer is reset or switched off.
