6
Selecting Color Corrections
6-28
Phaser 220 Drivers and Utilities
Printing the PANTONE
Ò
Color chart
Note
Do not use any color corrections in a driver, or with switches, or
with downloadable utility Þles, when printing the PANTONE
color chart or when selecting PANTONE Colors in
an application.
The
PANTONE¨-Tek Phaser 220
(
PANT220.PS
) Þle prints a PANTONE Color
sampler chart (about 36 pages in length). Use the chart to select colors
within an application that allows you to specify PANTONE Colors.
Macintosh users
Note
If you donÕt want to use a utility Þle, place Switch 8 and Switch 9
down
for no color correction on the Phaser 220i, or place
Switch 3
down
for no color correction on the Phaser 220e.
1.
Decompress the
Phaser
220 Samplers.sea
and the
Phaser
220
Utilities.sea
Þle from the Macintosh Printer Utilities diskette onto
your hard disk. Follow the instructions in the topic
ÒDecompressing the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore
You Begin.Ó
2.
Send the
No Color Corrections
Þle to the printer.
a.
Phaser 220i: Place both Switch 8 and Switch 9 in the
up
position.
Phaser 220e: Place Switch 3 in the
up
position.
b.
Select the appropriate printer in the
Chooser
.
c.
Locate the
No Color Corrections
file in the folder on your hard
disk containing decompressed Þles.
d.
Double-click the ÞleÕs self-sending arrow icon; click
OK
in the
dialog box to send the Þle to the printer.
