Tektronix NetTek YBT1E1, User Manual

Page: 47 / 122

Operating Basics
NetTek YBT1E1 T1 & E1 Circuit Tester User Manual
2- 5
Command Bar
Measurement
Results
Status and
Measurements
Test
Configuration
Measurement
Window Tabs
Figure 2- 5: Option T1 application window elements
H
Command Bar: The Command Bar provides common instrument
controls such as running and stopping measurements, setting
instrument test and operation parameters, and saving measure-
ments and instrument settings. See Tables 2--1 and 2--2, starting
on page 2--6, for a description of these elements.
H
Test Configuration: The Test Configuration area sets the
instrument test settings. See Table 2--3 on page 2--9 for a
description of these elements.
H
Status and Measurements: Displays receive signal status, enables
receive signal level and line code measurement, and initiates
timed and automatic test sequences. See Table 2--4 on page 2--11
for a description of these elements.
H
Measurement Results: Shows details of measurement results. The
appearance of this area changes depending on the selected
measurement tab. See
The Measurement Results Windows ,