Tektronix NetTek YBT1E1, User Manual

Page: 61 / 122

The Measurement Results Windows
NetTek YBT1E1 T1 & E1 Circuit Tester User Manual
2- 19
Insert Error button and Error Insertion List Box. The Insert Error button
lets you insert a single error into the output data stream. To insert a
single error, tap the
Insert Error
button. To change the error type,
tap the error list directly below the Insert Error button and select an
error type.
NOTE
. Configure the instrument for a Terminate connection before
inserting errors. See page 3--3 for instructions.
The NetTek YBT1E1 transmits a single error immediately. You must
loop the far end connection to monitor errors at the Rx (Receive)
input of the NetTek YBT1E1
. See Loopback Testing (Option T1
only) on page 3--19 for information on loopback set up and testing.
The Alarms and Errors Rolling Display
The Rolling Display shows alarm events in relationship to time. New
events are added at the right side of the display, and scroll to the left
as the application continues to take measurements. Use the scroll bar
below the Rolling Display to scroll through the events. Figure 2--10
shows the Rolling Display elements.