Performance Veri
fi
cation
Checking Option GbE performance.
Perform this procedure to check that the GbE
Gigabit Ethernet interface of MTX100B is operating properly. This test checks
that the transport stream data is correctly output from the MTX100B instrument.
Equipment required.
MTS400 Series MPEG system
RJ-45 cables
Crossover RJ-45 cable
1.
Connect the equipment as shown below.
Figure 2-32: Equipment setup for Option GbE performance veri
fi
cation
NOTE.
Check that V10.1 or greater MTX100B software is installed.
2.
Power on the MTS400 Series MPEG system and allow the Windows operating
system to boot completely. Wait an additional 90 seconds for the MPEG
system to complete the Option GbE
fi
rmware loading process.
3.
Con
fi
gure the DUT MTX100B system with the following settings for GbE
testing:
a.
Double-click the
MTX100B MPEG player
icon on the desktop to start
the player.
b.
From the
File
menu, select
Open
>
Look in
(dropdown menu) >
Local
Disk (D)
>
test streams
>
test40.TRP
>
Open
.
2–64
MTX100B Speci
fi
cations and Performance Veri
fi
cation
Summary of Contents for MTX100B
