background image

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and 
workmanship for a period of one (1) year from the date of shipment. If a product proves defective during this warranty 
period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will 
provide a replacement in exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of 
the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for 
packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges 
prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country 
in which the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, 
taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate 
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage 
resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to 
repair damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or 
malfunction caused by the use of non–Tektronix supplies; or d) to service a product that has been modified or 
integrated with other products when the effect of such modification or integration increases the time or difficulty of 
servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR 
IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY 
TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY 
PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS 
VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS 
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Summary of Contents for AWG5UP 11





















Reviews: