AWG5UP 11 Instructions Manual
5
Installation Instructions
The following instructions explain how to install the AWG5UP 11 upgrade kit to
your AWG520 instrument. Execute these items in the order they are described.
Installation Procedure
To install the new Removable Hard Disk Drive Kit, perform the following steps.
1. Remove the cabinet.
2. Remove the CPU unit.
3. Remove the internal hard disk drive.
4. Install the CPU unit.
5. Exchange the flat cable connecting to the CPU board, Flash disk and Hard Disk
Drive.
6. Install the Hard Disk Drive removed from your AWG520 to the Removable
Hard Disk Assembly.
7. Install the new cabinet with the Removable Hard Disk chassis.
8. Connect the flat cable from the internal CPU board to the connector board in
the Removable Hard Disk chassis.
9. Checking the operation of the AWG520.
10. Install the top cover and pasting the AWG5UP 11 Kit Label.
.
NOTE.
When your AWG520 is rackmounted instrument, you need additional
working to remove the cabinet modules and to reinstall the rackmount assembly.
Summary of Contents for AWG5UP 11
