Getting started
3.
Push the I/O Interface
bezel button and then the
GPIB bezel button.
4.
Push the Address bezel
button to assign a unique
address to the instrument.
The GPIB address
de
fi
nes a unique address
for the instrument. Each
device connected to the
GPIB bus must have a
unique GPIB address.
The GPIB address must
be from 0 to 30.
5.
Push the Con
fi
guration
bezel button to toggle
the instrument bus
communications on
and off.
Talk/Listen - Select
this mode to remotely
control the instrument
from an external host
computer.
Off Bus - Select this
mode to disconnect
the instrument from
the GPIB bus.
NOTE.
Refer to the AFG2021 Arbitrary/Function Generator Programmer Manual
for information about remote control commands.
20
AFG2021 Quick Start User Manual