Operating Basics
4.
In this page, you
can select the sweep
mode (Repeat or
Trigger) and trigger
source.
5.
This is a sample
oscilloscope screen.
The top is a sample of
a sweep waveform.
6.
This is a trigger output
signal.
Sweep frequency facts
If a start frequency is lower than a stop frequency, the instrument sweeps from
the low frequency to the high frequency.
If a start frequency is higher than a stop frequency, the instrument sweeps
from the high frequency to the low frequency.
Once the sweep is selected, the frequency is swept from the sweep start to
the sweep stop frequencies.
52
AFG2021 Quick Start User Manual