Operating basics
6.
Use the oscilloscope
auto-scaling function
to display the sine
waveform on the
screen.
If the instrument
outputs a default
sine waveform, you
can manually set
the oscilloscope as
follows:
500 ns/div
200 mV/div
7.
To change the
frequency, push
the front-panel
Sine button and
then push the
Frequency/Period/Phase
Menu bezel button.
8.
Push the Frequency
bezel button. You
can now change
the frequency value
using the numeric
keypad or the
general knob.
For example, if you
enter a value "2"
using the keypad,
the bezel menus
will automatically
change to Units.
After entering the
frequency value,
push the Units
bezel button or the
front-panel Enter
button to complete
the entry.
You can change the
Amplitude, Phase,
and Offset values in
the same way.
NOTE.
When you specify a waveform parameter using the bezel menu selection,
an active parameter is displayed in green in the graph area.
AFG2021 Quick Start User Manual
37