Operating basics
48
AFG1022 Quick Start User Manual
15.
Press
Output Setup
to set
output load value. Press
CH1Load
or
CH2Load
to
toggle 50 Ω and High Z. At
50 Ω status, use the general
purpose knob to adjust the
value on the current cursor
and use to / move
cursor. Use the numeric
keypad to adjust the
parameters and then choose
proper unit. The load range is
1 Ω to 10 KΩ.
NOTE:
Please setup the correct
load for right application.
16.
Press
System
to display the
submenu.
Language
(See page 6,
PowerOn
(See page5,
Set to Default
(See page 15,
17.
Press
NextPage
to enter
next submenu.
18.
Press
Beeper
to toggle the
beep sound Off and On.
19.
Press
Clk Ref
to toggle the
clock reference source
between Internal and External.
20.
Update firmware
(See page