24
AFG1022 Quick Start User Manual
Operating basics
Quick tutorial: How to generate a sine waveform
If you are a beginning user, follow the steps described here to learn how to
generate a continuous sine waveform.
1.
Connect the power
cord, and then
push the front-panel
power button to
turn on the
instrument.
2.
Connect a BNC cable
from the
Channel
Output of the
arbitrary/function
generator to an
oscilloscope input
connector.
3.
Push the
front-panel
Sine
button.
4.
The default run
mode is
Continuous after
power- on. If it is
not at Continuous
mode, push the
front-panel
Mod
button, and then
press the bezel
button to select
Continuous
among the four
run modes.
5.
Push the
front-panel
Channel
On/Off
button to
enable the output.
The backlight
should turn on.
6.
Use the oscill
oscope
auto-scaling function
to display the sine
waveform on th
e
screen.
If the instrument
outputs a default
sine waveform,
manually set the
oscillo
scope as
follows:
500 us/div
400 mV/div