Operating basics
44
AFG1022 Quick Start User Manual
Copy channel
setting
The instrument can copy the parameters of one channel to the other. If frequency or
amplitude of both channels are locked, when you change the parameter of either
channel, the parameter of the other channel is set to the same value.
1.
Push the
Inter CH
panel
button to display the
submenu.
2.
Press
CH2 To CH1
.to
copy parameters of CH2
to CH1.
3.
Press
CH1 To CH2
to copy
parameters of CH1 to CH2.
4.
Press
FreqLock
to toggle
between On and Off. At on
status, the frequency of the
two channels can be
adjusted synchronously.
5.
Press
AmpLock
to toggle
between On and Off. At on
status, the amplitude of the
two channels can be
adjusted synchronously.
6.
Press
PhaseDev
, and then
use the numeric keypad to
input the value of phase
deviation, or select Off to
disable it.
NOTE:
The PhaseDev bezel
button is only valid when
FreqLock is on.