Operating basics
AFG1022 Quick Start User Manual
43
7.
Press
Trigger
to select
Internal, External or
Manual.
Internal
means using
the internal trigger
source.
External
means using
the Ext Trig/FSK/Burst
connector on the rear
panel to input the
external triggered signal.
Press
Slope
to switch
between Positive and
Negative.
Manual
means choosing
manual trigger; in
Triggered Burst mode,
push the general
purpose knob on the
front panel to output a
burst signal.
To generate a gated burst
waveform
1.
Select a waveform and
then push the front-panel
Mod
button.
2.
Press
Burst
.
NOTE:
You cannot select
pulse, noise, or arb waveform
as a
carrier waveform.
3.
Press
N Cycle/Gated
to
select Gated
.
4.
Press
Start Phase
to
set start phase. The
start phase defines the
initial phase where the
waveform output
begins at, and it may
vary from -360 to 360.
For an Arbitrary
Waveform, 0° is the
first waveform point.
5.
Press
Polarity
to set
the polarity of the
gated burst waveform.