Tektronix 502 series, Instruction Manual

Page: 108 / 114

ACCESSORIES
Test Accessories
f "
P
015-001 (S 30) Delta Standards, for calibration of
the Type 130 L,C Meter. The unit provides accurately
adjusted steps of capacitance and inductance, selected
by a rotary selector switch. Values of the capacitance
steps correspond to the full-scale adjustments required
on the five scales o f the Type 130. Two resistors of
identical manufacture and similar capacitance, values
of
1
megohm and
0 . 1
megohm, are provided for the
resistance compensation adjustment. A 300-ju.h stand­
ard permits proper adjustments of the inductance
ranges ..............................................................................
2 2 . 0 0
013-00 2 (EP53) Plug-in Extension — Allows the
plug-in preamplifier unit for the Type 53 0 and Type
540-Series Oscilloscopes to be operated partially out of
its housing......................................................................... 5.00
0 1 3-00 5 (EP53A) Gain Set Adapter— Permits an ex­
ternal calibrating signal to bypass the plug-in preampli­
fier, for calibrating the sensitivity of the main amplifier
of Type 53 0 and 540-Series Oscilloscopes............ 5.00
011-021 (CS 4 7 ) Input Capacitance Standardizer— For
use with Type 53 and Type 5 3 /5 4 Plug-In Preamplifiers
having an input capacitance of 4 7 /x/rf. With this acces­
sory the input capacitance of each preamplifier can be
standardized to 4 7 /x/xf, eliminating the necessity for
probe readjustment when used with different plug-in
preamplifiers .................................................................. 11.50
0 1 1-02 2 (CS 20 ) Input Capacitance Standardizer—
Similar to 011 -021 (CS 4 7 ) , for use with the Type
5 3 /5 4 C and Type 5 3 /5 4 K Plug-In Preamplifiers having
20 /x/xf input c a p a c ita n c e .............................................11.50
A -10
T e k t r o n i x , In c