www.tek-trol.com
3
1
Safety Instructions
Please read this manual carefully and completely before you use the device for the first time.
The device may only be used by qualified personnel and repaired by Tek-Trol LLC personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability
and not covered by our warranty.
1.1
Intended Use
Tek-Clamp 1200A-100H is a Handheld Ultrasonic Flow Meter are used only for measure the
flow of liquids in closed pipes, e.g.: clean water, wastewater etc.
The manufacturer is not liable for damage caused by improper or non-designated use.
1.2
Safety Instructions from the Manufacturer
This meter was calibrated at the factory before shipment. To ensure correct use of the
meter, please read this manual thoroughly.
•
The device must only be used within the approved temperature range:
a) Environmental humidity max. <80 % RH
b) Environmental temperature 0 ... +70 °C
•
Do not expose the device to extreme temperatures, direct sunlight, extreme
humidity, condensation, or moisture.
•
With wet hands never use the instrument.
•
Before taking a measurement, the device should be stabilised to the ambient
temperature (important when carrying the device from cold to warm rooms and
vice versa).
•
Avoid strong electrical shocks.
•
Do not use the meter around corrosive or explosive gases.
•
The case should only be opened by qualified Tek-Trol LLC personnel.
•
Repairs and maintenance work may only be carried out by qualified Tek-Trol LLC
personnel.
•
Never place the front side of the device on a workbench or work surface to avoid
damage to the operating elements.
•
You must not make any technical changes to the device.
•
Keep the flow meter clean and dry.
•
The appliance should only be cleaned with a damp cloth. Use only pH-neutral
cleaner, no abrasives, or solvents.
•
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual. We
expressly point to our general guaranteed terms which can be found in our general terms
of business. If you have any questions, please contact Tek-Trol LLC. The contact details can
be found at the end of this manual.
