www.tek-trol.com
13
3
Installation
This section covers instructions on installation and commissioning. Installation of the device
must be carried out by trained; qualified specialists authorized to perform such works.
CAUTION
•
When removing the instrument from hazardous processes, avoid direct
contact with the fluid and the meter
•
All installation must comply with local installation requirements and local
electrical code
3.1
Correct Mounting Point
The correct mounting point is a major factor for the installation of a flow Meter. Installation
at wrong point may influence measuring accuracy or flow meter service life, or even
damage the flow meter.
The axis for measuring electrode shall be approximate to horizontal direction.
Tek-Clamp 1200A-100H Handheld Ultrasonic Flow Meter can simplify the ultrasonic flow
meter installation process, by shortening installation time and improving installation
accuracy. Tek-Clamp 1200A-100H Handheld Ultrasonic Flow Meter installed by two
methods:
Fig 8: Tek-Clamp 1200A-100H Handheld Ultrasonic Flow Meter
3.1.1
Clamp on Transducer:
Install the Tek-Clamp 1200A - 100H Handheld Ultrasonic Flow Meter (with magnet) on
the pipe. It can help finish the flow measurement without any pressure drop. The need
for cutting the pipe is eliminated.
