www.tek-trol.com
25
4.3.6
Menu Window List
•
M00~M09 windows
are suitable for viewing the instantaneous flow rate, net totalizer
value, positive totalizer value, negative totalizer value, instantaneous flow velocity,
date time, battery voltage and estimated working hours for the battery.
•
M10~M29 windows
have to be used for entering system parameters, such as pipe
outer diameter, pipe wall thickness, liquid type, transducer type / model, transducer
installation method, etc. Transducer installation spacing is also displayed on one of the
windows.
•
M30~M38 windows
allow the user to enter the flow rate unit and to configure the
totalizer. User can use these windows to select flow rate unit, such as cubic meter or
litre, as well as to turn on / off each totalizer, or to zero the totalizers.
•
M40
~M49 windows
are for setting response time, zeroing / calibrating the system and
changing password.
•
M50~M53 windows
are for setting up the built-in logger.
•
M60-M78 windows
are for setting up timekeeper and displaying software version,
system serial number ESN and alarms.
•
M82 window
is for viewing the totalizer.
•
M86~M89 windows
are useful to configure some parameters about the signal
management, such as automatic control, power selection and receive window width
•
M90~M94 windows
are for displaying diagnostic data. Those data are very useful when
doing a more accurate measurement.
•
M97~M99
are not setup windows but commands for window copy output and pipe
parameters output.
•
M+0~M+8 windows
offer some additional functions, including a scientific calculator,
display of the total working time, and display of the time and the flow rate when the
device is turned on and turned off.
Other menu windows such as
M88
have no functions, or functions were cancelled
because they are not applied to this version of the software. The major reason why the
menu windows are arranged in this way is to make this version compatible with the
previous ones. This will make things easier for a user that wants to switch from a previous
version to the new one.
