TEK-NTS03-G+-Manual-v3.-012022
P a g e
| 6
www.tekron.com
© 2022 by Tekron International Limited. All Rights Reserved. All trademarks are the property of their respective holders. The
information in this document is provided for informational use only and is subject to change. For further information or support,
2.
FRONT PANEL
The NTS 03-G+ features two LED indicators on the front panel (see Figure 2 - NTS 03-G+ front
panel), together with a 2-line by 16-character backlit LCD display.
SYNC LED
: Shows the status of the current sync source (as per LED Indicators Table 3).
ALM LED
: Shows the alarm status of the NTS 03-G+ (as per LED Indicators Table 4).
ADMIN (USB) Port
: This port can be used to configure the time server using the Tekron
Configuration Tool available for download on the Tekron website
LCD Display
On initial power-up, the LCD display shows a copyright message, along with the serial number
and revision level of the unit (see Figure 3).
After power-up, if the NTS 03-G+ is configured to operate in its default mode (GNSS
synchronized), then the display changes automatically to indicate that it is waiting for satellites
(see Figure 4).
Once one or more satellites have been discovered, it transitions to the operating default display
(see Figure 5).
Figure 6 and Figure 7 show alternative time displays that the user can access by pushing the
button on the front panel between the LED indicators. Successive button pushes can be used to
cycle through all the display screens in turn. Examples of the display screens are shown below.
Figure 2 - NTS 03-G+ front panel
