TEK-NTS03-G+-Manual-v3.-012022
P a g e
| 12
www.tekron.com
© 2022 by Tekron International Limited. All Rights Reserved. All trademarks are the property of their respective holders. The
information in this document is provided for informational use only and is subject to change. For further information or support,
LCD Alarm
Alarm Name Specification
IPeX
ETHx Address
Fault
This alarm comes up when the DHCP server is unavailable or when the IP
address is assigned to some other node in the network and cannot be
assigned to the port. Under such situations the port defaults to a link local
address.
eX represents the port number which has the alarm. For example, IPe1
indicates address fault alarm on ETH1.
SYNC FORCED
ON
Sync Forced This alarm is generated when the “Never leave Sync (Test Mode)” option has
been selected.
*
Note:
N/A indicates that this alarm does not appear on the LCD
Admin (USB) Port
A second Admin port (USB type B) is provided to support local
configuration/administration. The USB port has the same configuration options as the
Admin Ethernet port 1. The configuration software supplied with the NTS 03-G+
supports both USB and Ethernet configuration. A USB driver for the NTS 03-G+ can be
. The NTS 03-G+ can be configured using
USB only configuration to add an extra security layer.
