Tekram Technology P5T30-B4, User Manual

Page: 12 / 42

INSTALLING THE CPU AND MEMORY INSTALLING THE CPU AND MEMORY
P5T30-B4 User’s Manual
10
Plug the Molex-Type connector of the adaptive cable to the fan’s power connector and plug
the other 3-pin Header Connector to J12, regardless of the polarity. If your Fan provides this
3-pin Header Connector, simply plug it into J12, regardless of the polarity.
Setting the CPU Clock Selection Jumper (JBF0-2 & JFS0-2)
After installing the CPU, you must set the clock selection jumper to match the frequency of
the CPU. Find the Jumper Blocks labeled JBF0-2 and JFS0-2 on the mainboard (Refer to
the diagram on page 8). Set the jumper according to the table below for your CPU
frequency.
Jumper setting for CPU:
CPU Model CPU Clock Bus Clock (JFS0-2) Ratio (JBF0-2)
Intel Pentium 233MHz 66MHz x3.5
Intel Pentium 200MHz 66MHz x3.0
Intel Pentium 166MHz 66MHz x2.5
Intel Pentium 150MHz 60MHz x2.5
Intel Pentium 133MHz 66MHz x2.0
Intel Pentium 120MHz 60MHz x2.0
Intel Pentium 100MHz 66MHz x1.5
Intel Pentium 90MHz 60MHz x1.5
Intel Pentium 75MHz 50MHz x1.5
AMD-K6-PR300 300MHz 66MHz x4.5
AMD-K6-PR266 266MHz 66MHz x4.0
AMD-K6-PR233 233MHz 66MHz x3.5
AMD-K6-PR200 200MHz 66MHz x3.0
AMD-K6-PR166 166MHz 66MHz x2.5
AMD-K5-PR200 66MHz x3.0
AMD-K5-PR166 66MHz x2.5
AMD-K5-PR150 60MHz x2.5
AMD-K5-PR133 100MHz 66MHz x1.5
AMD-K5-PR120 90MHz 60MHz x1.5
AMD-K5-PR100 100MHz 66MHz x1.5
AMD-K5-PR90 90MHz 60MHz x1.5
AMD-K5-PR75 75MHz 50MHz x1.5
Cyrix 6x86MX PR233 (M2) 188MHz 75MHz x2.5
Cyrix 6x86MX PR200 (M2) 150MHz 75MHz x2.0
Cyrix 6x86MX PR200 (M2) 166MHz 66MHz x2.5
Cyrix 6x86MX PR166 (M2) 133MHz 66MHz x2.0
Cyrix 6x86MX PR166 (M2) 150MHz 60MHz x2.5
Cyrix 6x86 P200+ 150MHz 75MHz x2.0
Cyrix 6x86 P166+ 133MHz 66MHz x2.0
Cyrix 6x86 P150+ 120MHz 60MHz x2.0
Cyrix 6x86 P133+ 110MHz 55MHz x2.0