Teknoware TAPSA CONTROL TKT65, Installation And Maintenance Instructions Manual, Page: 30 / 53

VOT 34; Rev 1.81; EN; 11.12.2019
TKT65C
– Installation and maintenance
30
Disposal
Note the following issues regarding the disposal of the central battery unit system and its components:
Batteries and fluorescent lamps are hazardous waste. Metal parts can be put into aluminium or steel
waste. Wires, connectors and printed circuit boards are electronics waste. The plastic parts shall be
separated based on the material markings.
Follow the local laws and regulations in disposing the central battery unit system and its components.
7. Optional Features
Optional features are options that can be added to a central battery unit, depending on the model. You
can either

select a central battery unit that already includes the option, or

select the option as an added feature, depending on the model.
The options are presented in Chapter 3.5 List of optional features.
A sticker on the side of the central battery unit describes what optional features are included in your
central battery unit.
7.1
LCD display functions
The LCD display, under the name of TST6532, is an option for central battery systems. The LCD
displays the status of the central battery system, as well as stores test results in its memory. The
following information is available on the LCD: battery set charge, battery voltage, date, time, results of
battery tests and results of luminaire tests. The built-in memory of the LCD stores a two-year test
history.
Button functions
The LCD has three buttons, the uppermost of which has two separate functions: it the button is pressed
only briefly, it selects the current option; it is pressed and kept pressed for 1.5 s, the previous menu is
displayed. The middle and lowermost buttons are used for browsing for options and changing the value
of the selected parameter.
LCD content
If the LCD has not been configured, it will display the status screen shown below. In a few minutes, it
will receive configuration data from the central battery system, with the exception of luminaire circuits.
??.??.???? ??:??
System status
Voltage level xV
Charge current xA
Figure 1. LCD not yet configured
The first row shows the date and time in format: dd.mm.yy.hh.min. The date and time are provided by
the central battery system; alternatively, they can be manually set on the LCD.
The second row shows the status of the central battery system.
NOTE: For error code explanations, please refer to the error log. See chapter 0 Error log .